16
www.level1.com
Wireless PoE Access Points
Wireless Access Points are attractive for cost efective deployments or expansions of wireless network. With PoE function, the installation and maintenance
of wireless access points are easy and with no consideration for its power sources in their intended locations.
Internet
WAP-6012
PoE AP
Router
Gigabit PoE Switch
WAP-3100
54MbpsWireless PoE
Access Point
- IEEE 802.3af compatible
- Fully 802.11g infrastructure
operating mode
- Provides 10/100BASE-TX Fast
Ethernet interface
- Allows auto fallback data rate for
optimized reliability, throughput
and transmission range
- Provides 64/128-bit WEP, WPA,
andWPA2 network security
encryption
- WDS bridging function and
provides AP Client mode
- Max. Power Consumption: 4W
WAP-6012
300MbpsWireless Gigabit PoE
Access Point
- 3 antennas with 2T/3R MIMO
technology for wireless data rate
up to 300Mbps
- Compatible with 802.11b/g/n
wireless standards
- Provides 1 Gigabit Ethernet port
(1000Mbps)
- 802.3af Power over Ethernet (PoE)
for simple deployment
- Supports AP, AP Client, Bridge,
WDS and Repeater modes
- Supports WEP, WPA, WPA2 and
802.1x for high level security
- Supports Wi-Fi Protected Setup
(WPS) technology
- Supports Multi-SSID
(Up to 8 SSIDs)
- Max. Power Consumption: 3.5W
WAP-6102
300MbpsWireless Ceiling PoE
Access Point
- 2 built-in antennas (4dBi) with
2T/2R MIMO technology for
wireless data rates of up to
300Mbps
- Complies with IEEE 802.11n
and backwards compliant with
11b/g standards on the 2.4GHz
frequency
- Supports AP, WDS and Repeater
modes
- WEP, WPA, WPA2 and IEEE 802.1x
for high level security
- Supports Quality of Service
(WMM) to enhance user
performance and density
- Multi-SSID with 802.1Q VLAN
Tagging in AP mode
(up to 4 SSIDs)
- Max. Power Consumption: 4W
WAP-3101
108MbpsWireless Ceiling PoE
Access Point
- Complies wireless network speed
up to 108Mbps with Super G
and backward compliant with
802.11b/g standards
- Embedded two 4dBi directional
antennas in MIMO confguration
- 802.3af PoE compliant for easy
network deployment
- Supports WEP, WPA, WPA2 and
IEEE 802.1x for high level security
- Browser-based interface
confguration and management
- Support QoS (WMM) to enhance
user performance and density
- Supports Multi-SSID function
(4 SSID) in AP mode
RJ-45 Ethernet Cable (Data)
PoE (Power + Data)
WAP-6102
PoE AP