Surveillance Deployment through PoE Switches
For a “powerless” and true PoE Surveillance System, LevelOne recommends the deployment of a Cat.5 (or above)
Ethernet LAN by using our PoE switches. The switches provide PoE ports that can connect directly to our PoE
enabled network cameras over a 100m distance. This is an excellent solution to deploy together with power
redundancy to ensure constant power supply in case of power failure.
FSW-0809
4 FE + 4 FE PoE Switch
- Complies with IEEE 802.3af PoE
Standard
- Provides 8-Port 10/100Mbps Ethernet
Switch with 4-Port PoE capability
- Built-in protection for over current and
short circuit
- Features PoE Powered Device (PD)
classifcation identify
- Max. PoE output power: 30W
FSW-0513
4-Port Fast Ethernet High Power
PoE Switch
- 10/100Mbps Fast Ethernet Switch with
4 PoE ports and one uplink port
- PoE output power of enabled ports:
1-Port 48W; 2-Port 48W; 3-Port 40W;
4-Port 30W
- Power protection: over voltage, over
current and over temp protection
- Supports up to 2 K MAC address table
- Provides 512 KB frame bufer
- Max. PoE output power: 120W
FSW-1671
8 FE + 8 FE PoEWeb Smart Switch
- 16×10/100Mbps ports with 8 PoE ports
- Complies with IEEE802.3af standard
- Supports IEEE 802.3x fow control
- Supports back-pressure fow control for
half-duplex mode ports
- Supports 802.1Q VLAN
- Supports Port based/802.1P based QoS
(Quality of Service)
- Easy confguration via Web browser
- Max. PoE output power: 123.2W
GSW-2693
24 FE PoE + 2 GE Combo SFP L2
Managed Switch
- Enables a LAN with PoE powered
devices with a central power source
- 802.3ad port trunking with LACP and
802.1p
- Virtual stacking of up to 16 units
- 802.1Q Q-in-Q VLAN with up to 256
active VLANs
- 802.1d/w/s with spanning tree and rate
control
- Max. PoE output power: 185W
Internet
Local
Console
Broadband Router
PoE Switch
FCS-3081
PoE Network Camera
Ethernet Cable (RJ-45)
PoE (Power + Data)
Remote Viewing
via Internet
Power over Ethernet (PoE) Switches
21
Network Connectivity